The beset CompTIA 220-301 exam Q&A
Posted by 328203147 | Filed under Uncategorized
Exam : CompTIA 220-301
Title : A+ CORE HARDWARE(2003 Objectives)
From TestInside 220-301
1. A client asks a technician to add a DVD+R burner to a computer system. The technician does this and successfully tests the drive. Three weeks later, the client calls and says that the burner is no longer working. The technician learns that the drive reads CDs and DVDs, but will no longer burn DVDs. When arriving on site, what is the FIRST action that the technician should take?
A. check for a faulty IDE cable
B. be sure that the DVD+R is formatted before using it
C. check for incompatible media
D. re-install the DVD burning software
Answer: C
2. A user complains that a computer monitor is experiencing a jitter. Replacing the monitor and video card does not fix the problem. Which of the following could be causing the problem?
A. ESD (electrostatic discharge)
B. motherboard
C. RAMDAC
D. EMI (electromagnetic interference)
Answer: D
3. A customer receives a CD-RW disk from a computer vendor. The customer tries to read the disk in a computer with a 4X CD-ROM drive and is unable to read any information. The customer tries the CD-RW disk on a 32X CD-ROM drive and it reads correctly. What is the cause of this problem?
A. The 4X CD-ROM drive has dirty optics or laser and requires cleaning.
B. The 4X CD-ROM drive needs to be jumpered to support CD-RW disks.
C. The 4X CD-ROM drive does not support the multi-read specification.
D. The 4X CD-ROM is fine, but the CD-RW disk has a flaw in its format.
Answer: C
4. A user reports that while printing a large document, the local printer fails to print and the document cannot be deleted from the queue. What is the MOST likely cause of the problem?
A. The printer cable is not bi-directional.
B. The user does not have full printer administration rights.
C. The computer cannot spool and send the print job fast enough.
D. The print job is too big for the amount of available memory.
Answer: D
5. A Laser printer keeps getting a “Memory Overflow” error when printing a particular document. Which three of the following are possible fixes? (Select THREE)
A. reset the printer cable
B. replace the toner cartridge
C. decrease the print resolution
D. add more RAM to the printer
E. reduce the RET (Resolution Enhancement Technology)
Answer: CDE
More 220-301 exam demo download here
Tags: 220-301
CompTIA 220-301 exam
Posted by 328203147 | Filed under Uncategorized
Exam : CompTIA 220-301
Title : A+ CORE HARDWARE(2003 Objectives)
1. A defective CD-ROM drive is replaced with a new CD-ROM drive. The new CD-ROM drive is able to
read any CD that it accesses, but music CDs do not play music. What is the MOST likely cause of this
problem?
A. The audio cable is not connected to the drive.
B. The ribbon cable is not connected.
C. The power cable is not connected.
D. The CD-ROM drivers are not installed.
Answer: A
2. What is the FIRST and most important step in system troubleshooting?
A. back up the system data
B. gather information about the problem
C. try rebooting the system to see if that fixes the problem
D. check the System Error Log or Event Log
Answer: B
3. Which of the following is NOT a phase of the troubleshooting process?
A. confirm the repair
B. define the problem
C. document the results
D. simplify the problem
Answer: D
4. An A+ Certified Technician MUST do an install on a Windows XP system from the distribution CD.
However, the system does not boot from this CD. What is the MOST likely cause of this problem?
A. The CD is defective.
B. The CD is not bootable.
C. The CD-ROM drive is defective.
D. The Boot Sequence is not set in the BIOS to boot first from the CD.
Answer: D
Testinside
TestInside Help You Pass Any IT Exam http://www.TestInside.com
5. A computer boots up with the error “CMOS Checksum Failure.” Which of the following components
needs to be replaced?
A. power supply
B. CMOS chip
C. motherboard
D. CMOS battery
Answer: D
Tags: 220-301
